From Live screen:

• Right-click and choose Main Menu
  
• Login
  
• Click on the CAMERA icon [bottom row]
  
• Click on ENCODE [Left column]
  
• Select the recording resolution and frame rates desired for each camera
  
• Click APPLY and SAVE when all cameras have been adjusted
  
• Click on EVENT icon [bottom row] **IMPORTANT** DO NOT “COPY TO ALL” WITHIN THIS MENU. DOING SO WILL SET ALL CHANNELS TO RECORD ON CH 1
  
• Click on DETECT/VIDEO DETECT
  
• ENABLE motion for each channel
  
• Click region SETUP (do this for all channels) To select a region – left click and drag across screen to turn blocks red RED = Motion CLEAR = NO motion
  

•  Right-click to exit region settings
  
• Click APPLY and SAVE
  
• Click on the STORAGE icon [bottom row]
  
• Click SCHEDULE
  
• Click on the COG WHEEL icon  [right side]
  
• Deselect REGULAR and SELECT MD for Period 1
  

•  Select ALL for all days, click SAVE
  
• Click COPY and select ALL CAMERAS
  
• Click APPLY
  
• Click RECORD [Left column]
  
• Select ALL button listed under MAIN STREAM  SCHEDULE (or it also may say AUTO)
  
• Click APPLY/OK
  
• Right-Click to exit the Menu A green camera / red running men icons appear at the top right corner of each camera if motion is detecting. THERE ARE NO ICONS visible if motion is not being detected.
  

•  Green camera = Recording to the HDD
  
• Red running men = Motion is enabled and working