Basic Network Setup: For ECOM/ECO4/PRO4/SIP2/IP5 Series Recorders

From the Live Screen:

Step1: Right-click and choose MAIN MENU

Basic Network Setup-click main menu

 

 

 

 

 

 

 

Step2: Login with admin account

Step3:Click on NETWORK under SETTINGS (bottom row)

Basic Network Setup-Main Menu Screen

 

 

 

 

 

 

 

 

 

 

 

 

 

Step4: Select DHCP

Basic Network Setup-Select DHCP

 

 

 

 

 

 

 

 

 

 

Step5: APPLY and SAVE (Returns to Main Menu)

Step6: Click on the NETWORK icon under INFO (middle Column)

Step7: Click on LOAD

Step8:Verify LAN1 shows SUCCEED, and has a new IP address.

Basic Network Setup-Verify Network Succeed

 

NOTE: THE DEFAULT IP ADDRESS IS 192.168.1.108

THE NEW IP ADDRESS SHOULD REFLECT THE LOCAL NETWORK SCHEME.

If the IP address does not change after setting the DVR to DHCP. Check the network by opening a Command prompt window (Search > CMD) using a PC.

Type IPCONFIG, the first 3 digits of the PC IP address should match the DVR NEW IP ADDRESS. If these numbers do not match, troubleshoot cabling and network ports on the switch or router.

When IP address has been verified, return to MAIN MENU

•  Click NETWORK (Bottom row)
  
• Select STATIC
  
• Verify Information
  
• APPLY and SAVE
  
• Login to the router and proceed with port forwarding to the DVR.
  
  You will need to forward the HTTP and TCP port to the DVR IP address.
  
• The default ports are:
  • HTTP: 80 (recommended : Change this port for internet security)
    
  • TCP: 37777
    
    Reference www.portforward.com as a good website for configuring many routers
    

• Related Articles

• Password Account Settings For ECOM/ECO4/PRO4/SIP2/IP5 Series Recorders

  Step 1 From the Main Menu Select System Step 2 Select Account ➞ Click on the modify icon to change User Name and Password Note: You cannot modify the systems defaulted User Names. Step 3 Click on User Name drop-down menu and choose User Name to ...

• Password Configuration and Password Reset For ECOM/ECO4/PRO4/SIP2/IP5 Series Recorders

  Password Configuration and Password Reset Password Configuration and Password Reset 1. Introduction In order to strengthen device security and ensure the safety of user information, new updates on devices will feature initialization and password ...

• How to configure Motion Detection and recording for eLine Tribrid Recorders

  From Live screen: Right-click and choose Main Menu Login Click on the CAMERA icon [bottom row] Click on ENCODE [Left column] Select the recording resolution and frame rates desired for each camera Click APPLY and SAVE when all cameras have been ...